PART |
Description |
Maker |
NE3002-WA30A |
Near edge thermal printhead (with thermal historical control)
|
ROHM[Rohm]
|
SH2002-DC90A07 |
Near edge thermal printhead (8dots / mm)
|
Rohm
|
SH2002-DC90A |
Near edge thermal printhead (8dots / mm)
|
ROHM[Rohm]
|
ISL6293 ISL6293-2CR-T ISL6293-2CR ISL6293-2CRZ ISL |
Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SOIC -40 to 85 Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-PDIP -40 to 85 Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear and Preset 14-SO -40 to 85 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10 Li-ion/Li Polymer Battery Charger Accepting Two Power Sources
|
Intersil, Corp. INTERSIL[Intersil Corporation]
|
74ALVCH16374 74ALVCH16374_2 ACH16374DL ACH16374DGG |
2.5V/3.3V 16-bit edge-triggered D-type flip-flop (3-State)(2.5V/3.3V 16浣?竟缂?Е???D瑙?????涓??锛? 2.5V/3.3V 16-bit edge-triggered D-type flip-flop (3-State)(2.5V/3.3V 16位边缘触发的D触发器(三态)) 2.5V/3.3V 16-bit edge-triggered D-type flip-flop 3-State From old datasheet system 2.5 V / 3.3 V 16-bit edge-triggered D-type flip-flop (3-State)
|
NXP Semiconductors N.V. PHILIPS[Philips Semiconductors]
|
T11-123AB-1.23 T11-811-18 |
Circuit Breaker for Equipment thermal, Drop-in type, Reset type, Quick connect terminals
|
Schurter Inc.
|
4410.0106 4410.0264 4410.0655 4410.0046 4410.0044 |
Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals
|
Schurter Inc.
|
74AUP2G80GN 74AUP2G80GD |
Low-power dual D-type flip-flop; positive-edge trigger AUP/ULP/V SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO8 Low-power dual D-type flip-flop; positive-edge trigger 低功耗双D型触发器;上升沿触
|
NXP Semiconductors N.V.
|
SM134G0 SM095G0 SM110G0 SM126G0 SM095G1 SM110G1 SM |
FUSIBLE ALLOY THERMAL SENSITIVE TYPE, 0.5 AMPERES 250 Va.c. and 3 and 5 AMPERES 50 Vd.c. Rated Current Fusible alloy thermal pellet type,0.5A rated current
|
NEC
|
IDT74LVC374ASO IDT74LVC374A IDT74LVC374APG IDT74LV |
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5V TOLERANT I/O 3.3V CMOS Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs, 5.0V Tolerant I/O 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O From old datasheet system 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP
|
IDT[Integrated Device Technology]
|
DM74ALS564A DM74ALS564AWM DM74ALS564AN |
Octal D-Type Edge Triggered Flip-Flop with 3-STATE Outputs Octal D-Type Edge-Triggered Flip-Flop with From old datasheet system
|
FAIRCHILD[Fairchild Semiconductor]
|